汽车打磨房配置
|
外尺寸：（mm） Outer dimension:(mm) |
内尺寸：（mm） Inner dimension:(mm) |
总功率：（Kw） |
|
8200×4000×3350 |
6900×3900×2700（L*W*H） |
6.5 |
|
房体系统 Frame system |
1、顶部静压室采用冷扎钢板折弯喷涂成形，顶板采用镀锌板折弯拼装。 1、The ** of the plenum cold rolled plate bending spray molding, Roof made of ga**anized steel panel. 2、Equipment behind walls using 50mm thick EPS insulation board, the remaining three sides with PVC soft curtain, in a predetermi** slip aluminum rails. |
|
|
地台（可选） Basement（Optional） |
270mm高的**钢制拼装式，两道花纹板，三道地格栅，二个520*2000mm（W*L）上车坡。 **plete steel assemble 270 mm thick, two decorative pattern plate, three grille, two car step 520 * 2000 mm (W * L). |
|
|
排风系统 Exhaust system |
1、采用引进西门子技术生产的YDW系列双进风离心风机，此风机具有噪音低，风量大，能耗少等优点。型号:YDW-90LA；流量:14500m3/h；转速：940r/min；功率5.5KW；数量：1台 1、1* 5.5 KW double inlet air ce**ifugal fan,model YDW-90LA, air volume of 14500 cubic meters/hour 2、Intake air form the edge upper, aluminum alloy frame, EPS wallboard production, coated steel.Air duct made of Ga**anized plate(Thickness is 0.6mm),700*700*1000mm,3 pcs straight,1 pcs elbow. |
|
|
空气净化系统 Air purifi**ion system |
采用**亚**过滤棉，该过滤棉具有多层结构，设置在静压室底部，用顶网支撑，顶网为方管和圆管组合结构喷粉，无锈蚀，更换顶棉容易，能有效地捕捉直径大于5μm的尘粒。 Sub-efficient filter made of high quality cotton, the cotton filter has a multilayer structure is provided at the bottom of plenum with ** network support, the ** network for the square tube and pipe **posite structures dusting, no rust, replace the ** cotton easy, effective to capture dust particles diameter greater than 5μm |
|
|
照明系统 Lighting system |
上排斜置45°**用烤房倾斜顶灯，8组×3支=24支，每支36W，下排灯8组×2支=16支，每支36W，光照度≧800Lux灯箱用冷板制作。 Lamp boxes are 45° fixed on upper two side:With8groups*3pcs=24pcs*36 W, side lights:8groups*2pcs=16pcs*36W,illuminate≧800 Lux. |
|
|
电控系统 Co**ol system |
采用**电子元件组装, 主回路设有多重保护; 设有打磨开关、照明开关、紧急停止开关、故障**等. Superior electronic **ponent assembly, the main circuit with multiple protection; features polished switches, light switches, emergency s** switch, fault alarm |
|